科研论文： [1]yang l, wang l, zhao wh. hybrid modeling and analysis of multidirectional variable stiffness of the linear rolling guideway under combined loads[j]. proceedings of the institution of mechanical engineers, part c: journal of mechanical engineering science, 2020, 234(13): 2716–2727. (sci: 000516503600001; ei: 20201208332541) [2]yang l, zhang x, wang l, et al. dynamic error of multiaxis machine tools considering position dependent structural dynamics and axis coupling inertial forces[j]. proceedings of the institution of mechanical engineers, part b: journal of engineering manufacture, 2022. 236(3): 281-295. doi: 10.1177/09544054211028488 (sci: 000681105600001; ei: 20213210727863) [3]zhang x,yang l, zhao z, et al. research on the excitation characteristics of milling force for a general helix cutter [j]. the international journal of advanced manufacturing technology, 2022, 118: 449-464 [4]pan th, zhang jun,yang l, et al. tool breakage monitoring based on the feature fusion of spindle acceleration signal[j]. the international journal of advanced manufacturing technology, 2021, 117: 2973-2986 [5]湛承鹏，杨磊，杨啸等．基于稳定裕度的机床轮廓控制器增益设计方法[j]．中国机械工程，2020，31(13)：1513–1517． [6]王磊，杨磊，赵万华等．一种机床参数及其区间变化范围的主动设计方法[j]．机械工程学报，2017，53(09)：108–115． [7]wang l, liu ht,yang l, et al. the effect of axis coupling on machine tool dynamics determined by tool deviation[j]. international journal of machine tools and manufacture, 2015, 88: 71–81. |
